A Guide to Installing a Jeep Wrangler Leveling Kit

What Is a Leveling Kit?

A leveling kit is an aftermarket product that is designed to raise the front end of your Jeep Wrangler, usually by about 2". This is done by adding a spacer between the coil spring and the frame of the vehicle. The kit usually includes the spacers, bolts, and any other necessary hardware.

Why Install a Leveling Kit?

Leveling kits have several benefits. The most obvious is that they allow you to fit larger tires. This is because the additional height gives the tires more clearance from the fender wells. As a result, you can fit bigger, more aggressive tires.

Leveling kits also give your Jeep a more aggressive look. Many people find that the higher stance makes their Wrangler look more imposing and aggressive.

How to Install a Leveling Kit

Installing a leveling kit is not a difficult job, but it does require some mechanical knowledge. Before you start, make sure to read the instructions carefully and have all the necessary tools and parts.

The first step is to jack up the front of your Jeep and remove the wheels. Then, you will need to loosen and remove the upper control arm mounting bolts. Next, you will need to install the spacers between the coil spring and the frame of the vehicle. Finally, you will need to reinstall the upper control arm bolts and tighten them to the proper torque.

Conclusion

Installing a Jeep Wrangler leveling kit is a relatively straightforward process. It can give your vehicle a more aggressive look and allow you to fit larger tires. Just make sure to read the instructions carefully and have all the necessary tools and parts before you start.