How To Change The Oil in a Jeep Wrangler (2023)

Getting Ready to Change the Oil

Jeep Wrangler owners love to hit the trails, and that means that keeping up with regular maintenance is key. One of the simplest and most important steps of any maintenance routine is changing the oil. Since this is a relatively easy job, most people are able to do it themselves with the right tools and supplies. Before you get started, you’ll need to make sure you have the right oil filter, the correct type of oil, and the necessary tools to remove and replace the oil filter.

How to Change the Oil in a Jeep Wrangler

Once you’ve got everything you need, it’s time to get started. The first step is to warm up your engine for a few minutes. This will help the oil flow more easily. After that, you’ll need to locate the oil filter. It’s usually located on the side of the engine block. Then, use an oil filter wrench to loosen the oil filter. Once it’s loose, you can remove it by hand.

Next, place the new oil filter in the same place and tighten it with the oil filter wrench. Make sure it’s tight, but don’t over-tighten or you could damage the filter. Now, it’s time to add the new oil. The oil should be poured into the oil fill port, located on the side of the engine. Follow the manufacturer’s instructions for the recommended amount of oil.

Finishing Up

Once the oil has been added, you’ll need to start the engine and allow it to run for a few minutes. This will help the oil circulate. After that, you can turn off the engine and check the oil level using the dipstick. Make sure that the oil level is between the minimum and maximum marks. If it’s too low, you can add a bit more. Finally, double-check that all the bolts and hoses are secure, then you’re good to go!

Tips for Changing the Oil in a Jeep Wrangler

Changing the oil in a Jeep Wrangler is an easy job that can be done in an hour or two. Here are some tips to keep in mind:

Always use the correct type of oil. Check your owner’s manual to make sure you’re using the right type.
Make sure to use the correct oil filter. Different models of Jeep Wranglers have different oil filters.
Be sure to use the right tools for the job. An oil filter wrench is essential for removing and replacing the oil filter.
Never over-tighten the oil filter. This could damage the filter and cause it to leak.
Check the oil level with the dipstick after you’ve added the oil.
Double-check that all hoses and bolts are secure before you start driving.